Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

2-69
Configuring the ProCurve Wireless Services xl Module
SNMP Traps and Error Reporting
Enabling SNMP Traps
By default, all SNMP traps are disabled. To enable SNMP traps, complete the
following steps:
1. Click Management > SNMP Trap Configuration and select the Configura-
tion tab. The SNMP traps for the Wireless Edge Services xl Module are
divided into the following categories:
• Redundancy
• Miscellaneous
•NSM
•SNMP
• Wireless
Figure 2-43. Management > SNMP Trap Configuration Screen