Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

2-71
Configuring the ProCurve Wireless Services xl Module
SNMP Traps and Error Reporting
Disabling SNMP Traps
If you enable an SNMP trap and later decide that you want to disable it,
complete the following steps:
1. Click Management > SNMP Trap Configuration and select the Configura-
tion tab.
2. To disable a specific SNMP trap, expand the SNMP category. Select the
SNMP trap that you want to disable and click the Disable button, or double-
click the SNMP trap.
3. To disable all the SNMP traps in a category, select the category and click
the Disable all sub-items button.
4. Click the Apply button to save the change to the running-config.
5. Click the Save button in the navigation bar to save the change to the
startup-config.
Setting Thresholds
You can set the thresholds that determine when SNMP traps are generated.
Click Management > SNMP Trap Configuration and select the Wireless Statis-
tics Thresholds tab.