Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

2-73
Configuring the ProCurve Wireless Services xl Module
SNMP Traps and Error Reporting
You can also configure the minimum number of packets required to send an
SNMP trap. By default, the minimum number of packets is 1,000.
Sending Traps to an SNMP Receiver
SNMP agents send only one type of unsolicited message: trap messages. SNMP
agents send trap messages to report events. These messages enable the SNMP
server to generate logs and alarms. You can configure SNMP trap receivers—
the SNMP servers to which the Wireless Edge Services xl Module sends trap
messages. The SNMP trap receivers must use the public community.
Define an SNMP Server. To define an SNMP server, complete the following
steps:
1. Click Management > SNMP Trap Receivers.
2. Click the Add button.
Undecrypt Received Packets Station, radio, or WLAN
Total Stations Radio, WLAN, or module
Thresholds Set for Station, Radio, WLAN, or
Module