Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

2-75
Configuring the ProCurve Wireless Services xl Module
SNMP Traps and Error Reporting
Figure 2-47. Management > SNMP Trap Receivers Screen
Editing an SNMP Trap Receiver. If you define an SNMP trap receiver and
later need to change its IP address, complete the following steps:
1. Click Management > SNMP Trap Receivers.
2. Click the Edit button.
3. Change the IP address and click the OK button.
4. Click the Save button in the navigation bar to save the change to the
startup-config.