Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

2-85
Configuring the ProCurve Wireless Services xl Module
Radio Port Licenses
d. Under Generate Hardware ID section, click the Gen-Hw-ID button.
e. When a number is displayed in the System Generated Hardware ID field,
copy it or write it down. You must enter this number on the My
ProCurve Web portal.
7. Return to the My ProCurve Web portal. In the Enter Hardware ID# field,
paste (using Ctrl-V) or enter the hardware ID.
8. Enter notes in the Customer Notes field. This field is optional. For
example, you might want to enter a short description that explains where
this Wireless Edge Services xl Module is located. These notes are stored,
along with the registration ID number, in your account on the My
ProCurve Web portal.
9. Click Next. The License Agreement page is displayed.
10. Read the license terms. If you agree to these terms, check the I agree to
the license terms box.
11. Click Generate License. My ProCurve Web portal generates a license key
and displays it on the License Key Confirmation page. In addition, the
portal emails you the license key.
12. Copy the license key (Ctrl-C) from the screen or write it down.
13. Return to the Install License (Step 1 and Step 2) screen in the Web browser
interface for the Wireless Edge Services xl Module.
14. Under Step 2, Install License Key, enter the license key and click the Lic-
Install button. A message confirms a successful installation or identifies a
problem that prevented the license from installing.
15. If you have successfully installed the Wireless Services Module 12 RP
License, click Close. The new license is now listed on the Management >
Licenses screen.
Removing RP Licenses
If you want to transfer the Wireless Services Module 12 RP License from one
Wireless Edge Services xl Module to another, you must first access the Web
interface browser and uninstall the license. During this process, the Wireless
Services xl Module generates an uninstall verification key. You must copy or
record this key, so that you can enter it on the My ProCurve Web portal. The
Web portal, in turn, uses this key to generate a new verification key, which
you can use to install the Wireless Services Module 12 RP License on the new
Wireless Edge Services xl Module.