Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

2-89
Configuring the ProCurve Wireless Services xl Module
System Time
System Time
Because the Wireless Edge Services xl Module supports the Simple Network
Time Protocol (SNTP), you can configure it to take its time from an SNTP
server. This ensures that the module is always using the correct time, which
helps you maintain and monitor your company’s wireless services.
You can define up to three SNTP servers. To define an SNTP server, complete
the following steps:
1. Click Special Features > Time.
Figure 2-57. Special Features > Time Screen
2. Select the SNTP Client Setup box to enable the module to contact the SNTP
server you define.