Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

3-14
Wireless Local Area Networks (WLANs)
Configuration Options: Normal Versus Advanced Mode
Figure 3-8. Enabling Advanced Configuration
3. Enable the WLANs.
4. You must now manually assign the WLANs to RP radios. You can do this
in two ways:
• You can manually assign WLANs as a part of a default configuration
to be sent to any newly adopted RP.
In this case, the Wireless Edge Services xl Module deploys the WLAN
configuration to all RP radios when they are adopted, as it would in
normal mode. However, instead of automatically assigning WLAN 1
to BSSID 1 and so forth, the module allows you to select which WLANs
are assigned to which BSSIDs.
• You can manually assign WLANs to specific BSSIDs on specific RP
radios.
In this case, only the specified radios support the WLANs.