Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

3-17
Wireless Local Area Networks (WLANs)
Configuration Options: Normal Versus Advanced Mode
Note Depending on whether you enable WLANs or advanced mode configuration
first, the radio adoption configuration begins with either the normal WLAN
assignment or an empty WLAN assignment. Leaving the WLAN assignment in
the default configurations empty is not necessarily undesirable: it can increase
security. However, you should be aware that in this case newly adopted radios
will not support WLANs until you manually configure them to do so.
To modify the default configuration using advanced mode:
1. Select Network Setup > Radio Adoption Defaults.
2. Select the WLAN Assignment tab.
Figure 3-10. Customizing WLAN Assignment for the Radio Adoption Default
(Advanced Mode)
3. Choose the radio type from the Select Radio drop-down menu.