Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

3-18
Wireless Local Area Networks (WLANs)
Configuration Options: Normal Versus Advanced Mode
Note If your network includes radios of both types, you should remember to
configure a default WLAN assignment for each. Typically, these assign-
ments should match.
4. Check the Assign boxes to choose the WLANs that you want to assign to
the radio. Click Apply.
5. If you want to assign a specific WLAN to a specific BSSID number, or if
you want to choose the primary WLAN, complete steps 6 through 9.
6. Select a BSSID from one of the four listed under the radio. Check the
Assign box for the WLANs that you want to assign to this BSSID. (You can
choose up to four. Generally, but not always, you should fill all four BSSIDs
before you assign multiple WLANs to a BSSID.)
Figure 3-11. Assigning WLANs to a BSSID in the Default Configuration
7. In the Primary WLAN drop-down menu, choose the WLAN for which the
radio should beacon the SSID.
8. If you want to assign more WLANs to the radio, select another BSSID and
repeat steps 6 and 7.