Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

3-20
Wireless Local Area Networks (WLANs)
Configuration Options: Normal Versus Advanced Mode
4. You can assign SSIDs either to the radio as a whole or to a specific BSSID.
For example, you could assign SSIDs to the radio if:
• you are assigning four or fewer WLANs to the radio
• you are assigning more than four WLANs, but you want the radio to
advertise the four with the lowest index numbers
Complete step 5 to assign SSIDs to the radio as a whole. Complete step 6
to assign SSIDs to a specific BSSID.
5. As shown in Figure 3-13, check the Assign boxes for the WLANs that you
want the radio (or radios) to support. You can select up to 16 WLANs, but,
as in normal mode, the RP radio only beacons SSIDs for the four WLANs
with the lowest index numbers.
Click Apply.
6. Alternatively, you can assign a WLAN to a specific BSSID on the radio:
a. In the left area, Select Radio/BSS, select that BSSID.
b. Check the Assign box for a WLAN or WLANs. You can select up to four
WLANs, but as always, the beacons only include one.