Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

3-25
Wireless Local Area Networks (WLANs)
Configuration Options: Normal Versus Advanced Mode
You must check the WLAN assignment for all of the following configurations:
■ the radio adoption default configuration for 802.11a radios
■ the radio adoption default configuration for 802.11bg radios
■ the configuration for every RP radio adopted by your module
To disable advanced mode configuration:
1. Select Network Setup > WLAN Setup.
2. Click Global Settings.
3. Uncheck the Advanced Configuration box and click OK.
4. The screen shown in Figure 3-16 displays.
Figure 3-16. Disabling Advanced Configuration
5. Take care when selecting the button. Clicking both Yes and No will disable
advanced mode. However, clicking Yes also disables all WLANs.
Select No if you have verified that the WLAN assignment is compatible
with normal mode. This option disables advanced mode, but leaves
currently enabled WLANs active.
If you click No, but the WLAN assignment is incorrect, the screen shown
in Figure 3-17 displays.