Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

3-28
Wireless Local Area Networks (WLANs)
Configuring a WLAN
Figure 3-18. Network Setup > WLAN Setup > Configuration Screen
As you can see in Figure 3-18, this screen displays the 32 WLANs available for
configuration. Remember that in normal configuration mode, you can only
configure WLANs 1 through 16.
On the Wireless Edge Services xl Module, you do not create WLANs as such.
The module has already created them; you configure options for and enable
the WLANs. The default configuration for each WLAN is displayed in seven
columns.
The first column lists the WLANs by index number. Although you will create
your own name for the WLAN, this index number is important because it
determines which WLAN is the primary WLAN on a BSSID, if you enable more
than four WLANs. (By default, the WLAN with the lowest number is the
primary WLAN.)