Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

3-40
Wireless Local Area Networks (WLANs)
Configuring a WLAN
Figure 3-25. Specifying the RADIUS Server for Web-Auth
4. In the screen that displays, you can quickly get the WLAN running by
completing these minimal steps. (Learn more about the process in
Chapter 7: Web Authentication for Mobile Users.)
a. Specify the IP address of your network’s RADIUS server in the Primary
IP field under RADIUS Authentication.
b. Leave the Primary Port at the default value unless you know that your
server uses a different port.
c. Enter the shared secret that this server uses to identify the module in
the Primary Secret field.
d. Select one of the 0.0.0.0 addresses in the Allow List. In the Change field,
enter the address for the module and click the Change button.
e. Leave other settings at their defaults and click OK.
f. Click OK to exit the WLAN’s Edit screen.