Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

3-59
Wireless Local Area Networks (WLANs)
Configuring a WLAN
Figure 3-35. Global WLAN Settings Screen
4. Check the boxes for the features that you want to enable.
Note Keep the default setting in the WLAN Redundancy Group field.
Advanced configuration relates to how SSIDs are assigned to RP radios and
is described in “Advanced Mode Configuration” on page 3-11.
5. Click OK.
If you enabled WLAN prioritization, the module forwards traffic to RPs
according to the weight of the destination WLAN. See “Specifying a WLAN’s
QoS Weight” on page 3-83 to learn how to configure a specific WLAN’s weight.
Enabling the WLAN
RPs in your wireless network will not support the WLAN until you enable it.
To enable the WLAN:
1. Select Network Setup > WLAN Setup > Configuration.
2. Select the WLAN that you want to enable. You can use the
Shift key to
select multiple WLANs.
3. Click the Enable button.