Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

3-65
Wireless Local Area Networks (WLANs)
VLAN Assignment
Figure 3-40. Network Setup > WLAN Setup > VLAN Assignment Screen
The Network Setup > WLAN Setup > VLAN Assignment Screen shows:
■ WLANs, listed by SSID, in the first column
■ all the VLANs to which at least one WLAN has been assigned in the
subsequent columns
The check mark indicates which VLAN has been assigned to the WLAN.
For example, Figure 3-40 shows the Network Setup > WLAN Setup > VLAN
Assignment screen for a module on which two WLANs have been configured
and enabled. The first WLAN, MyWLAN, has already been assigned to VLAN
10. The second WLAN, Guest, is stilled assigned to the default VLAN 1. You
can change the VLAN assignment for the Guest WLAN simply by checking the
box in the VLAN 10 column. Note that because a WLAN can only be manually
assigned to a single VLAN, the check in the VLAN 1 column automatically
disappears, as shown in Figure 3-41.