Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

1-6
Introduction
ProCurve Wireless Edge Services xl Module
Figure 1-1. Auto-Provisioned Radio Port VLANs
Manually Establishing a Radio Port VLAN. If you connect an RP to
another infrastructure switch instead of directly to the wireless services-
enabled switch, you establish the Radio Port VLAN manually.
The wireless services-enabled switch still uses auto-provisioning to create
VLAN 2100 and tag the module’s internal downlink port for this VLAN.
However, you must configure the external interface on the switch that con-
nects to the RP as an untagged member of the Radio Port VLAN.