Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

3-80
Wireless Local Area Networks (WLANs)
Traffic Management (QoS)
Caution Because the module automatically defines settings such that traffic in a higher-
priority queue receives lower latency, the default station WMM parameters
settings are usually adequate. Also, because incorrect settings can adversely
affect network performance, ProCurve Networking generally recommends
that you do not change these parameters.
To customize station WMM parameters:
1. Select Network Setup > WLAN Setup > WMM.
Figure 3-48. Station EDCA (WMM) Parameters
2. Select the queue for which you want to alter the settings.
3. Click Edit. The screen shown in Figure 3-49 displays.