Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

1-8
Introduction
ProCurve Wireless Edge Services xl Module
this traffic does not pose a security risk. (However, using the default VLAN
instead of a VLAN dedicated exclusively to Radio Ports makes it easier for an
unauthorized RP to be plugged into your network and adopted by the module.)
In Figure 1-3, the administrator has decided to use VLAN 300 for one of the
RPs. (While nothing prevents you from placing all RPs in the same VLAN, such
a design is not mandatory.)
Figure 1-3. Manually Creating Radio Port VLANs
Remember that the internal downlink port must always be tagged for the
Radio Port VLAN, while the external switch port that connects to the RP must
always be untagged.