Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

4-17
Redundancy Groups
Configuring a Redundancy Group
Figure 4-9. Redundancy Group Is Enabled
13. Click the Apply button to save the configuration to the running-config.
14. Click the Save button in the navigation bar to save the configuration to
the startup-config.
15. Access the Web browser interface for the other module in the redundancy
group and complete steps 1–14 for that module.
Viewing Information about the Redundancy Group
After the primary module and the redundant module establish a redundancy
group, each module tracks the following information about the group:
■ Redundancy state is—This field lists the current state of the module.
Both primary and redundant modules go through the same redundancy
states:
• Disabled
•Startup
• Discovery
•Online