Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

5-3
Radio Port Configuration
Country-code and Regulatory Procedures
In addition, the ProCurve RPs improve quality of service (QoS) in the wireless
network with support for Wi-Fi Multimedia (WMM). Each radio automatically
divides outbound wireless traffic into four queues based on priority. For
example, voice traffic (if appropriately marked) is placed in the highest-
priority queue. The default settings for each queue are designed to provide a
high QoS for voice and video traffic from RPs to associated stations.
You will learn how to change radio queue settings so that you can make
adjustments if absolutely necessary. However, ProCurve Networking strongly
recommends that the default WMM settings be preserved.
Country-code and Regulatory
Procedures
While IEEE has codified the international wireless network specifications and
standards, each country has its own regulations for legal frequencies and
wireless use requirements. It is important to be aware of your country’s
standards when configuring your network.
Setting a device’s country code configures it to use radio settings legal in that
country. You must set the country code on your ProCurve Wireless Edge
Services xl Module before it will adopt RPs. Follow these steps:
1. Select Network Setup > Configuration.
2. Choose your country from the Country drop-down menu. (See Figure 5-1.)
3. Click Apply.