Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

5-11
Radio Port Configuration
Configuring Radio Settings
Figure 5-5. Editing a Radio Adoption Default Configuration
This screen includes three categories: Properties, Radio Settings, and Advanced
Properties. In the following sections, you will learn how to configure each of
the settings in this screen.
Viewing and Configuring Properties
For the most part, you view, rather than configure, settings in this section. The
Model indicates that these radio settings apply to the 200 series ProCurve RPs,
and the Radio Type indicates for which 802.11 mode you are configuring
settings.
You can also define all radios of this mode as dedicated detectors.
Adopting Radios as Detectors. To increase network security, you can con-
figure a radio to constantly scan for neighboring access points (APs) not
connected to this Wireless Edge Services xl Module. Such a radio is called a
detector, and it cannot provide a connection for wireless stations.