Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

5-32
Radio Port Configuration
Configuring Radio Settings
Index Type. The index type describes whether a radio was pre-configured
before the Wireless Edge Services xl Module adopted it. If a radio was adopted
with the default configuration, the index type is displayed as Dynamic. If you
created a configuration for the radio before allowing the module to adopt it,
the index type is Static. Refer to the Index Type to verify that a particular radio
is using the correct configuration.
Configuring Radio Settings for a Particular Radio
The Radio Settings section in a particular radio's Configuration screen includes
the same options as that in a radio type's default Configuration screen.
However, it also includes an Actual column. This column runs down the right
of the setting options and displays the channel and power level that the radio
is actually using. View this column to verify that the radio is using appropriate
settings and to determine whether you must make any configuration changes
or corrections.
This column also helps you to monitor your wireless network. For example,
even if a radio uses ACS to select its channel, you may want to know which
channel it has selected.