Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

5-33
Radio Port Configuration
Configuring Radio Settings
Figure 5-14. Radio Settings
To change the radio settings, follow these directions:
1. If you are not already in the correct screen, select Network Setup > Radio
> Configuration, select the radio that you want to configure, and click Edit.
2. It is very important that the radio’s placement be accurate. (See “Defining
the Radio Placement” on page 5-13 for more information.) Select Indoors
or Outdoors from the Placement drop-down menu.
3. When the radio was adopted, the Wireless Edge Services xl Module helped
it to automatically choose a channel either at random or using ACS. View
this channel in the Actual column, as shown in Figure 5-14.
4. You now have a new option for configuring the channel: you can manually
select a particular channel. From the Desired Channel drop-down menu,
choose Random, ACS, or the specific channel number. Channel numbers
will vary depending on the type of radio (802.11a or 802.11bg) that you are
configuring, the radio’s country code, and the radio's placement.
Actual Column
Placement
Channel Selection
Power Options