Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

5-37
Radio Port Configuration
Configuring Radio Settings
Resetting a Radio
It may become necessary for you to reboot an RP. For a dual-radio RP, you can
either reset the entire RP or only one of its radios. Follow these steps:
1. Select Network Setup > Radio.
2. Select the radio or radios.
3. Click Reset.
4. A screen displays, asking whether you want to reset the radio or the RP.
For example, the Network Setup > Radio > Configuration screen shown
in Figure 5-16 lists two radios. These radios are on the same RP. If you
select Reset Radio Only, the 802.11bg radio (which is the one selected from
the list) reboots. If you select Reset entire Radio Port, both radios reboot.
Make your selection.
Figure 5-16. Resetting a Radio
5. The RP or the RP radio (depending on your selection) reboots with the
configuration associated with that specific radio (not with the radio
adoption default configuration).