Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

6-7
Wireless Network Management
Monitoring the Wireless Network
Viewing Details about a Wireless Station
If you want to view more information about a particular station’s capabilities
and connection, highlight that station in the list in the Device Information >
Wireless Stations screen.
Click Details. A screen such as the one shown in Figure 6-2 displays.
Figure 6-2. Viewing Detailed Information about a Station
In addition to information also in the Device Information > Wireless Stations
screen (such as media access control [MAC] address, IP address, WLAN, and
VLAN), you can view:
■ BSS Address—This address is the basic SSID (BSSID) on the radio to
which the station connects. Each RP radio has four BSSIDs, which carry
traffic for different WLANs.
■ Voice—This setting indicates whether this station sends voice frames. You
can configure the Wireless Edge Services xl Module to grant higher QoS
for voice traffic.
■ WMM—This setting indicates whether the station supports Wi-Fi Multi-
media (WMM). If it does so, then the interface indicates the Access
Category (AC) that the station is currently using to transmit traffic. The
higher the AC, the better the QoS for the traffic. You can view the WMM
settings associated with that AC on the station's WLAN by selecting
Network Setup > WLAN Setup > WMM.