Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

6-13
Wireless Network Management
Monitoring the Wireless Network
As always, you can select either Last 30s or Last Hr to view either the most
current statistics or statistics over a more extended period. You can also view
more detailed statistics for a specific radio by selecting that radio and clicking
Details.
Figure 6-6. Radio Statistics Details
The Information section describes this radio and shows the number of stations
currently associated to it. You should check the Current Channel. If the radio is
configured with a manual channel, but currently uses a different channel, the
channel is red.
In the Details screen, statistics for wireless traffic are broken down into
received and transmitted traffic. (See Figure 6-6.) You can view the average
SNR for all stations connected to this radio under RF Status.
The Details screen also allows you to compare statistics for the last 30 seconds
and the last hour simultaneously.