Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

6-31
Wireless Network Management
AP Detection
Figure 6-21. Viewing the Unapproved APs List
Note You can also view this list by selecting Device Information > AP Detection >
Unapproved APs. However, you can only view information about APs in this
screen: you cannot allow the APs as described below.
As shown in Figure 6-21, the list includes this information for each AP:
■ Radio MAC Address—The address is the AP’s BSSID. RPs report each
BSSID that is a source of a beacon as a detected AP. Because an AP might
send beacons using several different BSSIDs, RPs might report the same
physical AP several times.
■ Reporting Radio—This is the index for the adopted radio that detected this
AP. This information can point you toward a rogue AP’s location.
■ Channel—This is the channel on which the detected AP operates.