Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

6-35
Wireless Network Management
AP Detection
1. Select Management > SNMP Trap Configuration > Configuration. The
screen shown in Figure 6-24 displays.
2. Expand the Wireless heading and then the AP Detection heading.
3. Click Enable all sub-items.
4. Make sure that the Allow Traps to be generated box is checked.
5. Click Apply.
Figure 6-24. Enabling an SNMP Trap for AP Detection
If an RP detects an external AP, a log appears in the Device Information >
Alarm Log screen, as shown in Figure 6-25.