Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

6-42
Wireless Network Management
Logging and Alarms
Figure 6-28. Forwarding Logs to an External Syslog Server
2. Check the Enable Logging to Syslog Server box.
3. Select the lowest severity for logs that the module will forward from the
corresponding drop-down menu. The default level is 6, Info.
4. From the Server Facility drop-down menu, select the facility that your
syslog server uses to receive such logs. Local7 is typically reserved for
network devices.
5. Enter the server’s IP address in one of the Server fields. You can specify
up to three syslog servers.
Viewing Events in the Local Log File
To view the events that the Wireless Edge Services xl Module has stored in its
own log file, select Management > System Logging > File Mgmt.
The top section of the screen displays files of logs the module has stored. Each
file is identified by name, size in bytes, the time at which it was created, and
the time it was last modified (that is, a new event was added to it).