Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

6-50
Wireless Network Management
Logging and Alarms
Figure 6-34. Viewing Alarm Details
General information that applies to all alarms of this type displays in the Alarm
Details section. The interface explains what the alarm means and suggests
possible solutions or causes. For example, details for a “radiusAuthFailed”
alarm suggest that you verify that your Wireless Edge Services xl Module can
connect to its RADIUS server.
The Alarm Message shows information specific to this alarm—in Figure 6-34,
identifying the station that failed to authenticate. Other information specific
to the log displays throughout the screen, the time stamp at the top, and the
status at the bottom.
Delete
You should periodically delete unimportant or no-longer-relevant alarms from
the log so you can easily focus on the most current alarms. For example, you
could group alarms by time stamp, use the
Shift key to select all events before
a particular date, and then click Delete.