Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

6-61
Wireless Network Management
Network Self Healing
Figure 6-41. Specifying Neighbors
4. In the screen that displays, the radio’s neighbors are listed on the right
under Neighbor Radios.
All other RP radios adopted by this module are listed on the left under
Available Radios: these are potential neighbors.
5. To add a neighbor, select a radio from the field on the left and click Add.
The radio moves to the right; it is now the neighbor of the radio that you
are editing.
6. To remove a radio from the neighbor list, select that radio from the list on
the right and click Remove.
7. You can add up to 16 neighbors, including radios that use a different 802.11
mode than the radio you are editing. Keep in mind, however, that if the
second radio’s wireless stations do not support the other mode, then this
radio cannot help them.