Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

6-66
Wireless Network Management
Network Self Healing
Figure 6-44. Defining the Action
3. Select the action from the SelfHealing Action drop-down menu:
• Select Open Rates to configure the radio to support all data rates.
• Select Raise Power to configure the radio to raise its power to the legal
maximum. See “Configuring a Self Healing Offset” on page 6-66 to
determine whether you will need to configure a self healing offset.
• Select Both to configure the radio to take both of these actions. This
is the default setting.
• Select None to configure the radio to take neither of these actions.
4. Click OK.
Configuring a Self Healing Offset
When you configure a radio to raise its transmit power as part of neighbor
recovery, you must configure a self healing offset for that radio if it meets
either of these criteria:
■ It uses an external antenna.
■ It is located close to another RP radio.