Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

7-9
Web Authentication for Mobile Users
Configuring Web-Auth
You must also set the security options, which specify the authentication
method and the encryption standard for the WLAN. In this case, you will select
Web-Auth(open) as the authentication method. The No Encryption option
is then automatically selected.
In addition to configuring these settings, you can configure advanced settings
for individual WLANs, which include inter-station blocking, closed system
operations, and inactivity timeouts. You can also configure settings for all
WLANs. For more information about configuring these additional settings, see
Chapter 3: Wireless Local Area Networks (WLANs).
To configure a WLAN to use Web-Auth, complete the following steps:
1. Click Network Setup > WLAN Setup and then select the Configuration tab.
Figure 7-6. Network Setup > WLAN Setup > Configuration Screen
2. Select the WLAN you want to use Web-Auth and click the Edit button.