Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

2-21
Configuring the ProCurve Wireless Services xl Module
Network Services Manager
Figure 2-9. Network Setup > Ethernet > Configuration Screen
The following information is listed for each VLAN:
■ Name
■ VLAN ID
■ DHCP Enabled
■ IP Address
■ Subnet Mask
■ Management Interface
Only one VLAN can be selected as the management interface, and that VLAN
is identified with a green check mark. All other VLANs show a red x in the
Management Interface field.
Assigning an IP Address to a VLAN
To assign an IP address to a VLAN, complete the following steps:
1. Click Network Setup > Ethernet and select the Configuration tab.