Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

2-22
Configuring the ProCurve Wireless Services xl Module
Network Services Manager
2. Click the Add button at the bottom of the screen.
Figure 2-10. Add New VLAN Screen
Note The Add New VLAN screen lists the uplink and downlink ports for:
■ the wireless services-enabled switch
■ any other Wireless Edge Services xl Module or Redundant Wireless Ser-
vices xl Module installed in the switch
This screen does not show uplink and downlink ports for the module you are
currently managing. In this example, the Wireless Edge Services xl Module
being managed is installed in slot C in the wireless services-enabled switch.
The uplink and downlink ports for this module are not listed. However, a
Redundant Wireless Services xl Module is installed in slot B, and the uplink
and downlink ports for this module are listed.
3. In the VLAN ID box, enter the number of the VLAN.