Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

2-24
Configuring the ProCurve Wireless Services xl Module
Network Services Manager
Editing the IP Address Assigned to a VLAN
If you need to change the IP address that is assigned to a VLAN, complete the
following steps:
1. Click Network Setup > Ethernet and select the Configuration tab.
2. Select the VLAN and then click the Edit button.
Figure 2-11. Configuration VLAN Screen
3. Change the settings as needed and click OK.
4. Click the Save button in the navigation bar to save the changes to the
startup-config.
Viewing Statistics for VLANs That Are Assigned IP Addresses
The Wireless Edge Services xl Module tracks statistics for VLANs that are
assigned IP addresses. To view these statistics, enter Network Setup > Ether-
net and select the Statistics tab.