Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

2-28
Configuring the ProCurve Wireless Services xl Module
Network Services Manager
Figure 2-14. Network Setup > Internet Protocol > Domain Name System Screen
2. Click the Add button at the bottom of the screen.
Figure 2-15. Add DNS Server Screen
3. In the Server IP Address field, enter the IP address of the DNS server.
4. Click OK. The DNS server is now listed on the Network Setup > Internet
Protocol > Domain Name System screen.
5. Click the Save button at the bottom of the navigation bar to save the
change to the startup-config.