Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

2-29
Configuring the ProCurve Wireless Services xl Module
Network Services Manager
Deleting a DNS Server
If you want to remove a DNS server that is listed on the Network Setup >
Internet Protocol > Domain Name System screen, complete the following
steps:
1. Click Network Setup > Internet Protocol and select the Domain Name
System tab.
2. Select the DNS server you want to delete and click the Delete button at
the bottom of the screen. A prompt is displayed, asking if you want to
delete the item.
3. Click Yes to remove the DNS server.
4. Click the Save button at the bottom of the navigation bar to save the
change to the startup-config.
Specifying a Default Domain Name
To specify a default domain name, complete the following steps:
1. Click Network Setup > Internet Protocol and select the Domain Name
System tab.
2. On the Network Setup > Internet Protocol > Domain Name System screen,
click the Global Settings button.
Figure 2-16. Edit DNS Settings Screen
3. Enter your company’s domain name.
4. Click OK.
5. Click the Save button at the bottom of the navigation bar to save the
change to the startup-config.