Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

2-124
Configuring the ProCurve Wireless Edge Services xl Module
Radio Port Licenses
If you install additional RP licenses on a Wireless Edge Services xl Module,
these licenses remain with the module if you move the module:
■ from one slot to another slot in the same wireless services-enabled switch
■ from one wireless services-enabled switch to another
It is possible, however, to move additive licenses—those purchased through
the Wireless Services Module 12 RP License—from one Wireless Edge Ser-
vices xl Module to another. For example, suppose your company’s marketing
department moved from the North building to the South building at your
company’s main office. Both buildings have a wireless services-enabled
switch: the Wireless Edge Services xl Module in the North building has 24 RP
licenses, and the Wireless Edge Services xl Module in the South building has
12 RP licenses. After you move the marketing department, there are fewer
users in the North building, so you no longer need as many RP licenses in the
North building. With the added users in the South building, however, you need
more RP licenses on that Wireless Edge Services xl Module.