Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

11-14
RADIUS Server
RADIUS Authentication
5. Specify the times of day when users in this group can connect to the
wireless network.
a. In the Time of Access Start field, enter the earliest time that users can
connect.
b. In the Time Access End field, enter the latest time users can connect.
Always enter times in four digits, the first two digits being the hour in the
24-hour clock and the second two digits being the minutes.
As shown in Figure 11-5, by default, users can connect at any time of the
day or night.
6. In the Time of access in days section, check the boxes to specify the days
of the week when users in this group can connect to the wireless network.
By default, network access is available every day.
7. Check the Guest Group box if you want this group to be for guests.
Guests have temporary accounts. (See “Creating User Accounts” on
page 11-15.)
8. Click the OK button.
The group is displayed in the top section of the Network Setup > Local RADIUS
Server > Groups screen. Information and policies for the group are listed in
these columns:
■ Name—the name of the group
■ Guest Group—displays a red X for normal groups and a green check for
guest groups
■ VLAN ID—the dynamic VLAN for users in this group (if dynamic VLANs
are enabled for the WLAN to which the user associates)
■ Time of Access Start—the time at which users in this group can begin
connecting to the network
■ Time of Access End—the time at which users in this group can no longer
connect to the network (even if they enter the correct password)
The Time of access in days section of the Network Setup > Local RADIUS Server
> Groups screen includes a box for each day of the week. When you select a
group, the boxes are checked for days on which users in that group can
connect to the network.
You can modify these settings for a group:
■ VLAN ID
■ time of access start and end
■ days access is allowed