Read Me First 2.4.5 Software 2004-03

The following Declaration of Conformity applies to the HP ProCurve 802.11a AP Kit
160wl products (HP product numbers J8138A, J8148A, J8149A, and J8150A).
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Manufacturer's Name: Hewlett-Packard Company
Manufacturer's Address: 8000 Foothills Blvd.
Roseville, CA 95747-5502
U.S.A.
declares, that the product
Product Name: HP Procurve Wireless 802.11a Access Point kit 160wl
Model Number(s): J8149A
Regulatory Model: PC50E-4-ET/A
conforms to the following Product Specifications:
Safety: IEC 60950:1991 + A1, A2, A3, A4 / EN 60950:1992 + A1, A2, A3, A4, A11
Health: EU 1999/519/EC
EMC: CISPR 22:1997 / EN 55022:1998 Class B
1
CISPR 24:1997 / EN 55024:1998
EN 301 489-1:2001-09
EN 301 489-17:2000-09
Telecom: EN 301 893:2002-07 (draft)
Notified Body Number: 0336
TNO Certification B.V.
P.O. Box 6080, 2600 JA Delft, The Netherlands
Supplementary Information:
The product herewith complies with the requirements of the Low Voltage Directive
73/23/EEC, the EMC Directive 89/336/EEC and the R&TTE Directive 1999/5/EC Annex IV
and carries the CE marking accordingly.
1) The Product was tested in a typical configuration with an HP 520wl Access Point.
Roseville, March 5, 2003
European Contact: Your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department
HQ-TRE, Herrenberger Straße 140, D-71034 Böblingen (FAX: + 49-7031-14-3143)
© 2004 Hewlett-Packard Development Company, L.P.
Part Number: 5990-6061
All rights reserved. Reproduction, adaptation, or
March 2004
translation without prior written permission is
Printed in Taiw
an
prohibited except as allowed under the copyright
laws.
Technical inform
ation in this document is subject to
*5990-6061*
change without notice.