ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the GbE Interconnect Switch using the Command Line Interface
Use the following command to initiate TFTP file transfers from the TFTP server.
Command Description
tftp download type {fw | cfg}
[path <path_filename ]
[ip <ip_addr>]
[port <port_num>]
Initiates TFTP file transfers from the TFTP
server
Type one of the following in the command:
• fw—Initiates TFTP download of a firmware
file
• cfg—Initiates TFTP download of a
configuration file
The following optional parameters override their
defaults only for the duration of this one
command. These do not set the default.
• path <path_filename>—Type path and the
path filename to use for a file download
command. The path name can be from 1 to
64 characters in length.
• ip <ip_addr>—Type ip and the IP address
for the TFTP server to use. The <ip_addr>
default is 0.0.0.0.
• port <port_num>—Type port and the port
number to use for the TFTP server. The
<port_num> default is 69.
Initiating a TFTP Upload for Log File or Configuration File
The GbE Interconnect Switch configuration file and the history log can be uploaded from the
switch to TFTP server storage. After completing the final configuration for the GbE
Interconnect Switch, HP highly recommends that you save the configuration file to TFTP
server storage. The GbE Interconnect Switch configuration file is saved in XML format.
IMPORTANT: For security reasons, user account information is not saved in the XML configuration file
and must be managed by the GbE Interconnect Switch administrator. User account information can be
manually added to the XML configuration file after it is uploaded, or it can be re-entered using the CLI,
menu-driven interface, or Web interface.
HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide 2-89