ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the GbE Interconnect Switch using the Command Line Interface
Use the following command to initiate TFTP file transfers of the history log or configuration
file to the TFTP server.
Command Description
tftp upload type {log | cfg}
[path <path_filename>]
[ip <ip_addr>]
[port <port_num>]
Initiates TFTP file transfers to the TFTP server
Type one of the following in the command:
• log—Initiates TFTP upload of a firmware
file
• cfg—Initiates TFTP upload of a
configuration file
The following optional parameters override their
defaults only for the duration of this one
command. These do not set the default.
• path <path_filename>—Type path and the
path filename to use for a file upload
command. The path name can be from 1 to
64 characters in length.
• ip <ip_addr>—Type ip and the IP address
for the TFTP server to use. The <ip_addr>
default is 0.0.0.0.
• port <port_num>—Type port and the port
number to use for the TFTP server. The
<port_num> default is 69.
Displaying TFTP Parameters
Use the following command to display TFTP parameters.
Command Description
tftp show
Displays the parameters used for TFTP file
transfers
This example shows TFTP settings.
2-90 HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide