ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide

A
Commands
Introduction
This appendix provides a summary of the commands supported by the GbE Interconnect
Switch command line interface (CLI). Refer to Chapter 2 for a detailed description of each
command.
Using the Command Line Interface
Command Description
menu
Toggles from the CLI to the menu-driven interface
def-interface set {menu | cli}
Sets the default interface to either the menu-driven interface
or the CLI
def-interface show
Displays the default interface
help
[<command>]
Displays a complete list of available commands
To display a help message for a specified command, type
the command.
history
Displays the contents of the history buffer
history clear
Clears the history buffer
prompt <prompt_string>
Customizes the command prompt
clear
Clears the current CLI screen and displays a fresh page
with a command prompt
paging {on | off}
Configures the switch to display one page of data at a time
Saving Changes
Command Description
cfg save
Saves current configuration settings to the switch NVRAM
cfg show
Displays current configuration settings
HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide A-1