ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide

Commands
Configuring IGMP Snooping
Command Description
igmp enable {feature | vlan <vlan_id>}
Enables the switch to read IGMP packets being
forwarded through the switch in order to obtain
forwarding information from them and learn
which ports contain multicast members
igmp disable {feature | vlan <vlan_id>}
Disables IGMP snooping globally on the GbE
Interconnect Switch or on a specified VLAN
igmp set filter {all | unregistered | filter}
Sets IGMP filter mode for processing multicast
packets and the parameters for VLAN-based
IGMP snooping
igmp add
vlan <vlan_id>
state {non | v1 | v2}
robustness <robustness>
interval <query_interval>
response <response>
Adds a VLAN to the IGMP snooping table and
sets the IGMP snooping parameters
igmp modify vlan <vlan_id>
{
[state {non | v1 | v2}]
[robustness <robustness>]
[interval <query_interval>]
[response <response>]
}
Modifies the parameters for a specified VLAN in
the IGMP snooping table
igmp delete vlan <vlanlist>
Deletes an entry in the IGMP snooping table for
a specified VLAN
igmp show
{
filter |
vlan {* | <vlan_id>} |
status {* | <vlan_id>} |
dynamic-reg
}
Displays IGMP snooping settings for a specific
VLAN or VLANs
HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide A-5