ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide

Commands
Configuring Thresholds for Broadcast, Multicast, Unknown
Storm Prevention or Monitoring
Command Description
monitor-storm enable
{ [broadcast] [multicast] [unknown] }
Enables monitoring of broadcast, multicast, or
unknown packet storm monitoring
monitor-storm disable
{ [broadcast] [multicast] [unknown] }
Disables monitoring of broadcast, multicast, or
unknown packet storms
monitor-storm set threshold <threshold>
Sets threshold (in packets per second) to drop
packets when broadcast, multicast, or unknown
packet rate exceeds this threshold
monitor-storm show
Displays the monitor storm settings, including
the threshold information for broadcast,
multicast, and unknown packet storm
Configuring Priority MAC Address
Command Description
mac-pri add
id <vlan_id>
mac <mac_addr>
priority <pri>
look-at {src | dest | either}
Adds an entry into the priority MAC address
table and sets the priority level for a MAC
address within a specified VLAN
mac-pri delete
id <vlan_id>
mac {<mac_addr> | all}
Removes an entry from the priority MAC
address table
mac-pri modify
id <vlan_id>
mac <mac_addr>
{
[pri <pri>]
[look-at {src | dest | either}]
}
Modifies an entry in the priority MAC address
table for a specified VLAN
mac-pri show
[vlan <vlanlist>]
Displays current priority level for a MAC address
all VLANS
HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide A-17