ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide

Overview
Table 1-2: Common Parameters continued
Parameter Description
<vlan_id> Type a VLAN ID in the following format where nnnn is a number from 1 to
4094. Leading zeros are allowed, but not necessary.
Format: nnnn
Example: 24
<vlan_name> Type a name that is 1 to 15 characters in length to identify the VLAN. Use an
underscore (_) to connect words. If the string of character includes blank
space, you must type it within quotation marks (“ ”).
Example: default_vlan
<vlanlist> Type a VLAN number or numbers in the following ways:
• One number
Example: vlan 20
• A list of numbers are separated by a comma (,)
Example: vlan 10, 30, 60, 80
• A range of numbers are entered with a dash (-)
Example: vlan 10-15
• A range of numbers plus additional numbers are separated by commas
Example: vlan 10-15, 60, 80
• All VLANs on all units are identified by adding an asterisk (*) after the
keyword vlan
Example: vlan *
Using Command Line Editing Keys
The following describes the line-editing keys available using the CLI:
Keys Description
Backspace
Deletes the character to the left of the cursor and shifts the
remainder of the line to the left
Ctrl+D or Delete
Deletes the character under the cursor and shifts the remainder
of the line to the left
Ctrl+F or Right Arrow
Moves the cursor to the right
Ctrl+B or Left Arrow
Moves the cursor to the left
Ctrl+A
Moves the cursor to the first character in the line
Ctrl+E
Moves the cursor to the space to the right of the last character in
the line
Ctrl+C
Terminates the command and displays a new prompt
HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide 1-7