ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide

Overview
Question Mark (?)
You can also access help by typing a question mark (?) at the beginning of a command or
partial command.
This example shows the help that displays when you type ? gvrp enable.
Using Command Completion
You can complete a command by typing a partial character string at the command prompt and
then pressing the Tab key. When possible, the system displays the complete command for
you. When not possible, the system generates an error message.
For example:
At the command prompt, type sy sh and then press the Tab key.
The system completes the command.
The cursor appears immediately after the keyword, allowing you to enter additional
information. If no command exists that matches what you have typed, no action is carried out
and the system returns to the prompt.
In addition, you can type an abbreviation for the command and press the Enter key. The
system will complete and execute your command if possible.
HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide 1-9