ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the GbE Interconnect Switch using the Command Line Interface
The following table summarizes user access rights.
Table 2-1: User Access Rights
Privilege Root User+ User
Configuration Yes Read-only Read-only
Network Monitoring Yes Read-only Read-only
Community Strings and Trap Stations Yes Read-only Read-only
Update Firmware and Configuration Files Yes No No
System Utilities Yes Ping-only Ping-only
Factory Reset Yes No No
Reboot Switch Yes Yes No
Add/Update/Delete User Accounts Yes No No
View User Accounts Yes No No
The following shows the factory default user account settings:
Feature Default Value
Username None
Password None
Adding a User Account
Use the following command to add user account information:
Command Description
user add
user <username>
access {r | u+ | u}
Adds a user account
Type the following in the command:
• user <username>—Type user and the user’s name.
Username can be between 1 and 15 characters.
• access {r | u+ | u}—Type access and the user’s
access level:
• r—root
• u+—user +
• u—user
After entering the command, the system will prompt twice to
enter the user’s password.
HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide 2-3