ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the GbE Interconnect Switch using the Command Line Interface
You can also display the settings for the advanced switch features including global settings
for IGMP snooping, GVRP, Telnet status, Web status, SNTP, and others.
Use the following command to display the GbE Interconnect Switch information:
Command Description
system show
[advanced]
Displays basic switch information
Type advanced in the command to
display advanced switch information.
Refer to the following examples.
This example shows the basic switch information.
— Device Type—Displays the name of the GbE Interconnect Switch.
— Option #—Displays the option number for the GbE Interconnect Switch and
Interconnect Module combination.
— Switch Spare #—Displays the spare part number for the GbE Interconnect Switch.
— MAC Address—Identifies the Ethernet address for the GbE Interconnect Switch.
— Boot PROM Version—Identifies the version number of Boot PROM code installed
on the GbE Interconnect Switch.
— Manufacturing Date—Displays the manufacture date of the GbE Interconnect
Switch.
— Firmware Version—Identifies the version number of the firmware installed on the
GbE Interconnect Switch.
— Build Date—Displays the firmware build date number.
— Hardware Version—Identifies the version number of the GbE Interconnect Switch
hardware build.
— Configuration Save Time—Displays the time the current settings were saved to the
configuration file. If the current time has never been set up on the GbE Interconnect
Switch, “Unknown” will be displayed.
2-10 HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide